The #1 estimating app for plumbers.
Drop a PDF blueprint. BluPrynt extracts every fixture, fitting, and pipe spec, matches it to a 4,500+ material database with regional pricing, and delivers a full bid package — itemized estimate, materials list, labor breakdown, and AIA schedule of values — in under 10 minutes.
Sub-10-minute setup · No card required · Cancel anytime
- saved per bid
- 6 hrs
- line items matched
- 94+
- to bid package
- <10 min
- states covered
- 50
The bottleneck
Manual plumbing takeoff is the bottleneck killing your bid volume.
Most commercial plumbing estimators spend 8–16 hours on a single bid. That ceiling isn't demand — it's tracing pipes in PlanSwift, copying line items from a 12-month-old spreadsheet, and rebuilding a schedule of values from scratch every project. The legacy desktop tools still require manual takeoff. ServiceTitan and Housecall Pro don't read blueprints at all — they're CRMs with quote builders bolted on.
8–16 hours of manual takeoff
Under 10 minutes from PDF to bid package
3–10 bids per week, capped by takeoff
Capped by your sales pipeline, not your tool
Trace pipes by hand in PlanSwift or TurboBid
AI reads fixtures, schedules, specs, keyed notes
Excel sheet last updated 18 months ago
4,500+ items with regional cost multipliers, all 50 states
Cobble it together — estimate, SOV, materials list, Gantt
Seven deliverables auto-generated, AIA G702/G703 ready
Cross-reference IPC and UPC manually
Code-aware: IPC, UPC, Florida Plumbing Code
How AI takeoff works
Built for how plumbing estimators actually work.
BluPrynt doesn't replace the estimator — it handles the manual extraction so you can do the part that matters: review the matches, adjust quantities, and submit a bid you stand behind. The output is organized by CSI Division 22 and ready for AIA G702/G703 progress billing.
Reads fixture schedules and equipment lists
Parses keyed notes, general notes, riser diagrams, and floor plans together — so a single Kohler K-3978 callout connects to its quantity, fixture group, and rough-in spec.
Recognizes commercial plumbing systems
Sanitary, water distribution, gas piping, storm and roof drains, fixtures, equipment. Trained on commercial new-construction, tenant improvement, and light industrial drawing sets.
Code-aware to IPC, UPC, and Florida Plumbing Code
Surface fixture-unit calcs, vent sizing, and backflow requirements that match the code your jurisdiction is enforcing. None of the legacy tools advertise this.
Confidence on every line item
BluPrynt shows the exact material it matched and a confidence level. Anything lower-confidence is flagged for your review — quantities, materials, and pipe sizing all editable inline.
The full bid package
A complete bid package, not just a number.
PlanSwift gives you a takeoff. ServiceTitan gives you a quote. BluPrynt gives you everything a GC asks for: itemized estimate, project analysis, materials list, labor breakdown by trade and phase using MCAA labor productivity rates, AIA G702/G703 schedule of values, Gantt chart, and a complete XLSX export. Seven deliverables on every estimate — auto-generated, editable, and ready to send.
Itemized estimate
100+ line items with materials, quantities, unit costs, and labor — organized by CSI Division 22.
Project analysis
Fixture-unit summary, equipment list, code-driven sizing notes, and risk flags for owner review.
Materials list
Specs, models, and quantities formatted for supplier RFQs. Drop straight into your buyout.
Labor breakdown
Hours by trade and phase using MCAA productivity rates. Journeyman / apprentice mix configurable.
Schedule of values (AIA)
G702 / G703 format ready for progress billing. CFO and GC accept it without back-and-forth.
Gantt chart
Phasing and durations for rough-in, top-out, and trim — synced to the SOV milestones.
XLSX export
Full estimate, materials, labor, and SOV in one workbook. Edit, share, and own your data.
Built for commercial plumbing
Built specifically for commercial plumbing contractors.
BluPrynt is purpose-built for commercial work — tenant improvements, ground-up new construction, multi-family, medical office, restaurant, and light industrial. It recognizes commercial-specific systems (backflow preventers, grease interceptors, water hammer arrestors, expansion tanks) and applies regional cost multipliers for all 50 states. Not a CRM. Not a quote builder. An estimating tool for senior estimators doing real bid work.
Tenant improvement
Office, retail, and creative TI fit-outs. Demolition, re-rough, and new fixture work tied to existing risers.
Ground-up new construction
Multi-floor commercial. Sanitary, water, gas, storm, and roof drains — full division 22 scope.
Multi-family
Garden-style, mid-rise, podium. Stack take-offs, bath/kitchen rough-ins per unit, and risers.
Medical office
MOB and clinical. Med-gas, lab waste, sterile fixtures, backflow assemblies, and code-specific venting.
Restaurant & food service
Grease interceptor sizing, hand-sink counts, hot water, gas line work, and FOG compliance.
Light industrial
Warehouse, distribution, and small-manufacturing scope with floor drains, eyewash, and process water.
Return on investment
Pays for itself on the first bid every month.
At a fully-loaded estimator cost of $50–$75/hour, saving 8–16 hours per bid recoups $400–$1,200 every estimate. Most customers see ROI on the first bid of the month — the rest of the month is margin. Adjust the sliders below to see what BluPrynt would return for your shop.
After $549.99/mo Professional (Starter $249.99 also fits this volume)
What contractors are saying
From estimators on the tools.
Real names, real companies, real bid volumes. No paid reviews, no astroturf.
“We were spending 12 hours per commercial bid in PlanSwift. With BluPrynt, the takeoff and estimate are done in under ten minutes. I review for 20, send the package, and move on. We're bidding three times the volume.”
“Our shop was capped on bid volume because of the estimator bottleneck. BluPrynt made hiring an extra estimator a non-issue — the existing team is doing 4× the work and we're winning more bids because we can chase smaller jobs that used to not be worth our time.”
“The schedule of values comes out ready for the GC. We used to rebuild the SOV from scratch every project — now it lines up to the estimate, the materials list, and the Gantt chart automatically. Saves us a half day per submission.”
How it works
Three steps. Zero busywork.
The bid is still yours — the grunt work isn't.
Upload your plans
Drop a PDF blueprint — residential, commercial, or light industrial, up to 50MB and any page count. Floor plans, risers, fixture schedules, and spec pages are all parsed together.
AI builds your estimate
In under 10 minutes, you have 100+ line items with materials, quantities, labor, and regional cost multipliers applied. Confidence scoring is on every row — uncertain items are flagged for your review.
Adjust, export, win
Live sliders for overhead, profit, contingency, and tax. Edit any line inline. Export the full bid package — estimate, materials, labor, AIA SOV, Gantt — as PDF or XLSX. Submit and move to the next bid.
Frequently asked
Questions, handled.
Your next estimate is under 10 minutes away.
3 free estimates. No credit card. No commitment. Upload your first blueprint and see the full deliverable package — itemized estimate, materials list, labor breakdown, SOV, and Gantt — auto-generated in under 10 minutes.